Why cordless impact wrenches are available in different torque levels?
Because a cordless impact wrench used for routine tire changes does not need to deliver the same power as a tool designed for trucks, trailers, agricultural machinery, or heavy equipment. Choosing the right power level can make the tool easier to control, more comfortable to use, and better suited to the fasteners you regularly work with.
The AOBEN cordless impact wrench range includes four power options:
These four models are not simply more powerful versions of the same tool. Each torque level is intended for a different range of fasteners, vehicles, equipment, and working conditions.
What Changes When Torque Increases?
As torque increases, the impact wrench can generally handle larger fasteners, tougher removal conditions, and heavier equipment. The main differences appear in four areas.
1. The Size of Fasteners the Tool Can Handle
Smaller automotive fasteners normally require less power than the large nuts and bolts used on trucks, trailers, agricultural machinery, and construction equipment.
A 450 ft-lbs impact wrench may be sufficient for many everyday automotive jobs, while an 810 or 1100 ft-lbs model provides more capacity for larger hardware and heavier assemblies.
2. The Condition of the Fastener
A clean fastener that was installed correctly is usually easier to remove than one that is:
-
Rusted
-
Corroded
-
Covered in dirt or debris
-
Exposed to repeated heating and cooling
-
Previously overtightened
-
Left untouched for many years
When fasteners are difficult to loosen, additional reverse torque becomes especially valuable.
This is why the AB7337B keeps 450 ft-lbs in the forward direction while increasing reverse torque to 600 ft-lbs.
3. The Type of Vehicle or Equipment
Different vehicles place very different demands on an impact wrench.
Family sedan and motorcycles generally use smaller fasteners than pickup trucks, large trailers, tractors, commercial vehicles, and heavy equipment.
The larger and heavier the equipment, the more likely it is that a higher-torque impact wrench will be required.
4. The Amount of Power Reserve
An impact wrench does not need to operate at its maximum output on every fastener.
However, having additional torque available can help when a job becomes more difficult than expected. This extra capacity is known as power reserve.
A user working mainly on Family sedan may be well served by 450 ft-lbs. A professional who regularly handles rusted suspension components, axle nuts, trailers, or machinery may need the larger power reserve of an 810 or 1100 ft-lbs model.
450 ft-lbs: Balanced Power for Everyday Maintenance
The AB7336 provides 450 ft-lbs torque in both forward and reverse directions.
It provides enough power for many common repair and maintenance tasks while remaining suitable for users who do not regularly work on extremely large or heavily seized fasteners.
Typical applications include:
-
Family sedan tire changes
-
Lug nut removal and installation
-
Motorcycle maintenance
-
Brake servicing
-
Light suspension work
-
Equipment assembly
-
General home and garage repairs
This torque level is a practical choice for DIY users, car owners, automotive enthusiasts, and anyone who needs a dependable cordless impact wrench for regular maintenance.
AB7337B: More Power for Removal
The model is designed for users who need normal fastening power but stronger performance when loosening difficult nuts and bolts.
Compared with the AB7336, the forward torque remains the same. The main difference is the additional 150 ft-lbs of reverse torque.
That extra reverse power is useful when removing:
Rusted lug nuts
Overtightened fasteners
Corroded bolts
Fasteners on older vehicles
Components exposed to moisture and road salt
Nuts and bolts that have not been removed for a long time
It is especially suitable for users who do not need 810 or 1100 ft-lbs for every job but frequently encounter fasteners that are harder to remove than normal.
AB7337C: A Major Step Up for Professional Repair Work
The AB7337C provides 810 ft-lbs in both forward and reverse directions.
This represents a clear increase in working capacity compared with AB7336 and AB7337B.
The difference is not only that the tool can remove tighter fasteners. It also provides greater torque for larger components and more demanding repair environments.
-
Typical applications include:
-
Pickup truck maintenance
-
Trailer repair
-
Axle nut removal
-
Heavy suspension work
-
Chassis fasteners
-
Agricultural equipment
-
Workshop maintenance
-
Construction machinery repair
The 810 ft-lbs model is well suited to professional mechanics, maintenance technicians, contractors, and users who regularly work beyond basic passenger-car maintenance.
It provides a strong middle point in the AOBEN range. It offers significantly more power than the everyday models without requiring every user to move directly to the maximum 1100 ft-lbs option.
AB7337D: Maximum Power for Heavy-Duty Equipment
The AOBEN 1100 ft-lbs cordless impact wrench is designed for the most demanding applications in the range.
It provides 1100 ft-lbs in both forward and reverse directions, giving users substantial power for large fasteners and heavy equipment.
-
Typical applications include:
-
Commercial vehicle maintenance
-
Large trailer repair
-
Agricultural machinery
-
Tractors and farm equipment
-
Construction machinery
-
Heavy mechanical equipment
-
Fleet maintenance
-
Industrial assembly and disassembly
For routine passenger-car work, 1100 ft-lbs may provide more power than necessary. For heavy-equipment technicians, agricultural workers, fleet service teams, and construction professionals, however, the higher output can reduce the effort required to complete difficult jobs.
The main benefit of this model is not simply having the highest specification. It is having enough power available when lower-torque tools may not be suitable for the application.
How Do the Four AOBEN Power Levels Differ?
The four models can be understood as a progression of working capability.
From AB7336 to AB7337B
The main improvement is stronger reverse performance.
Both models provide 450 ft-lbs in forward, but the AB7337B model increases reverse torque to help remove rusted, overtightened, or stubborn fasteners.
From AB7337B to AB7337C
The tool moves from automotive-focused removal power to higher torque in both directions.
The AB7337C is better suited to larger fasteners, pickups, trailers, chassis components, axle nuts, and machinery maintenance.
From AB7337C to AB7337D
The application range expands from professional automotive and medium-duty machinery work to commercial vehicles and heavy equipment.
The AB7337D provides the largest power reserve in the range for demanding repair and maintenance tasks.
Which Power Level Is Right for You?
The easiest way to choose is to match the impact wrench to the heaviest work you perform regularly.
For home garage and everyday automotive work
Choose the AB7336 model.
It is suitable for passenger cars, motorcycles, tire changes, and general maintenance.
For stubborn automotive fasteners
Choose the AB7337B model.
It maintains 450 ft-lbs of forward torque while providing additional reverse power for difficult removal jobs.
For pickups, trailers, and professional repairs
Choose the AB7337C model.
It offers higher torque in both directions for larger fasteners, suspension components, axle nuts, and machinery.
For commercial vehicles and heavy equipment
Choose the AB7337D model.
It provides maximum torque for agricultural equipment, construction machinery, large trailers, and industrial maintenance.
Why AOBEN Offers Multiple Torque Levels?
There is no single cordless impact wrench that is ideal for every user.
A homeowner changing passenger-car tires has different requirements from a mechanic repairing a pickup truck. A technician maintaining agricultural machinery needs more torque than someone performing occasional garage work.
Offering several power levels allows users to choose a tool that matches their actual needs.
The AOBEN range covers four distinct levels of work:
-
AB7336: everyday maintenance
-
AB7337B: stronger removal performance
-
AB7337C: professional high-torque repair
-
AB7337D: heavy-duty equipment maintenance